Fillers | Epifanes UK

Epifanes Epoxy Filler 1500

A very strong two-component light-weight filler based on epoxy resins. Chemical and water resistant, shrink-free and low odor. Can fill up to 1.5 cm in one single application. Prior to use, stir each component separately and then thoroughly together until color is uniform. Do not use under 12°C. Best sandable properties are between 24 and 48 hours.

Application
Fiberglass - Steel - Wood - aluminum: in two-component epoxy systems above and below the waterline. Smaller repairs may also be topcoated with one-component primers/ topcoats. Larger repair areas should always be topcoated with two-component Poly-urethane. May be followed by a one-component finish if desired.

Filled areas must be well degreased with Epifanes Spraythinner for Paint and Varnish. This will prevent clogging of grease in the sandpaper and will ensure a better bonding. Follow by sanding with 120.

      

         

     

   


  SPECIFICATIONS

Epoxy Filler
1500
 Epoxy Finishing
Filler

Fibreglass
Filler

  Combi
Filler

  Container Size: 750 ml - 1500 ml. 1000 ml is sufficient for 11 sq. ft./1.1 m²/ @ 0.5 mm
  film thickness
  Pot Life After Mixing: 15-40 minutes depending on temperature and filler volume
  Mixing Ratio: By volume: 100 : 50. By weight: 100 : 50
  Sandable: After 24 hours at 65°F./18°C.
  Colour: Grey